Справочник Пользователя для Speed Queen drying tumblers tmb1268c
© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Installation/Operation Supplement
23
M414881 (EN)
Control Instructions
Manual Timer Control
RT Control Suffix
1. Set the HEAT/DRYING timer for the number of
minutes (from 0-60) desired.
2. Set the COOL DOWN/COOLING timer for the
number of minutes (from 0-15) desired.
3. Set the TEMPERATURE selector at HIGH,
LOW or anywhere between these settings.
4. Press the PUSH TO START button in, and hold it
in for approximately three seconds. This starts
the tumbler cycle.
the tumbler cycle.
IMPORTANT: If the loading door or lint panel
door is opened during the cycle, the heating system
will shut off and the motor will stop. To restart the
cycle, both doors must be closed and the PUSH TO
START button must be pressed in.
door is opened during the cycle, the heating system
will shut off and the motor will stop. To restart the
cycle, both doors must be closed and the PUSH TO
START button must be pressed in.
5. When the cycle is complete, open door and
remove the laundry.
TMB2142N
Figure 6
TMB2143N
Figure 7
TMB2144N
Figure 8
10
20
40
30
50
60
0
HEAT
10
5
COOL
DOWN
15
0
HIGH
TEMPERATURE
LOW
TMB2146N
Figure 9
PUSH
TO
START