Справочник Пользователя для TEAC GF-550

< The default setting is 0. Every time the recording is finished, the 

setting is automatically reset to 0.

< Different sources to be recorded (record, cassette tape, CD, etc.) 

have different volumes. In order to record at the optimal volume 
for different sources, it is necessary to adjust the recording level 
for each source.

When you connect to the headphones jack of the radio 
cassette recorder or portable player etc. 
Set the recording level to “0dB” and adjust the volume of 
connected device.
If the recording level is row, adjust the recording level so that the 
loudest sound does not exceed the “OVER” indicator on the peak 
level meter.

Move the tone arm to the edge of the record or a position to 
record and slowly put it down.

< While the turntable is stopped, the PLAY/PAUSE button(y/J) 

will not work and you cannot start recording.

Start or pause playback of the cassette tape.

<  Press the PLAY button (y) to start playback.
< To pause playback, press the PAUSE button (J) and then PLAY 

button (

y).

< To prevent the beginning part from being cut out, cue the 

cassette tape and pause playback, then after starting recording 
as described in step 

 , press the PUASE button (

J) to start 

playback.

<  You can not start recording while the cassette tape is stopped.

Play the component connected to the AUX terminal.

< To prevent the beginning part from being cut out, cue the 

component and pause playback temporarily, then after starting 
recording as described in step 

 , release the pause of the 

component to start playback.

< If the component does not have the pause function, after 

starting recording as described in step 

 , start playback of the 

component.

y/J) to start recording.

When the playback of the source finishes, press the STOP button 
(

H) to stop recording.

When playback of a record finishes and the turntable stops 
rotating or playback of a cassette tape finishes, recording 
automatically ends.

But to prevent unwanted noise from the tone arm or cassette 
tape being recorded, stop the recording manually by using the 
STOP button as soon as the playback of numbers you want to 
record finishes..

When recording is stopped, “REC” and “-End-” blink for several 
seconds. Do not turn OFF the power or shake the unit during 
recording or when “REC” and “-----” are blinking. Such actions 
prevent proper recording.