Справочник Пользователя для Aleratec 260203

www.aleratec.com

24

The following steps will show you how to load your Master Disc into the installed 

Hard Drive as a partition and copy the stored partition onto blank discs. This process 

is recommended for mass volume production.
To load your Master Disc onto a hard drive partition, please do the following:
1.  Make sure the Source is set to the Hard Drive.

It is very important to make sure the Source is set for the Hard Drive in order to 

avoid unnecessary error messages. To check what the Source is set to, please do 

the following:
a.  Use UP or DOWN arrow button to navigate to the following screen.

b.  Press ENT to enter “Select Source” menu and you will see the following:

Make sure it is located at “Hard Drive”. If not, press the UP or DOWN 

arrow button to search for it. There will be drive model information where 

XXXXXX is shown above.









c.  Press ENT to submit your selection. After your selection has been 

submitted, you will see the following display:

2.  Load your Master Disc onto the Hard Drive.

a.  Use the UP or DOWN arrow button to navigate to the following screen.







