Справочник Пользователя для TEAC MCDV600

To play a disc, select “DISC Source” using the FUNCTION button 
and set a disc.

To play an USB memory device, select “USB Source” using the 
FUNCTION button and set an USB memory device.

To listen to the FM, select “FM Radio” using the FUNCTION 
button and tune in to a station.

The clock and the TIMER indicator ( 

 ) are displayed.

<  The unit will turn on at the specified time every day.

<  The unit turns on with the source that was last selected.

If the timer reaches the timer-on time, the unit is set to  
“SLEEP-60” automatically and the power will be switched off 
(standby) 60 minutes later.
If you want to listen continuously, press the SLEEP button 
repeatedly to select “SLEEP OFF” after reaches the timer-on-time.

To cancel the Wake Up Timer
In standby mode, press the TIMER button repeatedly until the 
“ON” blinks on the display. Then set the Wake Up Timer to “OFF” 
by pressing the VOL+ or VOL- button and the TIMER button (the 
Wake Up Timer will be cancelled).
Unplugging the unit also cancels the Wake Up Timer.

If you have problems with your system, look through this chart and 
see if you can solve the problem yourself before calling your dealer or 
TEAC service center.

e Check the connection to the AC power supply. Check and make 

sure the AC source is not a switched outlet and that, if it is, the 
switch is turned on. Make sure there is power to the AC outlet by 
plugging another item such as a lamp or fan.

e Press the STANDBY/ON button to turn the unit on.

e Press the STANDBY/ON button to turn the unit on.
e If the batteries are dead, change the batteries.
e Use remote control unit within the range (16 ft/5 m) and point at 

the front panel.

e Clear obstacles between the remote control unit and the main 

unit.

e If a strong light is near the unit, turn it off.

e Place the unit as far away from a TV as possible.
e Make sure the line cords and speaker cables are as far away from 

the AC supply as possible.

e Reload the disc with the label side UP.
e Use a playable disc (page 6).
e If the disc is dirty, clean the surface of the disc.
e A blank disc has been loaded. Load a prerecorded disc.
e Check the region code of the DVD (page 6).
e If the unit is condensed, leave the unit for one or two hours with 

the power turned on (page 5).

PROHIBIT icon “A” appears on the screen.

e The operation is not permitted by the disc or the unit.
e Note that during playback of a title part (cautions, software 

maker’s logo, etc.), most operations are prohibited by the disc. 

e If another operation is still in process, wait a moment and try 

again. 

e Although it is possible to enter the setup screen while playback 

is continuing (or in resume mode), not all menu functions will be 
available. Expand the number of available functions by pressing 
the Stop (H) button twice.

e Scanning does not work within menus. 

e Place the unit on a stable place to avoid vibration and shock.
e If the disc is dirty, clean the surface of the disc.
e Do not use scratched, damaged or warped discs.