Справочник Пользователя для Epson photopc 3000z
4-4
Making Settings
4.
Turn the camera’s dial switch to
or
, then press
the image quality button
on the top of the camera
until
appears on the display panel.
5.
Press the shutter button to take a TIFF photo.
Note:
After you take a TIFF photo, the camera takes
approximately 32 seconds to process the image.
After you take a TIFF photo, the camera takes
approximately 32 seconds to process the image.
Setting the flash
The flash has the following effective ranges, depending
upon the optical zoom ratio and whether or not the macro
setting is used.
upon the optical zoom ratio and whether or not the macro
setting is used.
The effective flash range varies depending on the sensitivity
setting (see page A-3 for details).
setting (see page A-3 for details).
Turn on the camera and press the button on the top of the
camera to cycle through the flash settings. The settings
appear on the display panel as shown below.
camera to cycle through the flash settings. The settings
appear on the display panel as shown below.
The flash settings are as follows:
Automatic
The flash fires automatically whenever more
lighting is needed.
The flash fires automatically whenever more
lighting is needed.
Wide (minimum zoom):
50-420 centimeters
Tele (maximum zoom):
50-340 centimeters
Macro:
20-50 centimeters
Automatic (default setting)
Forced flash
Flash off
Slow synchro
(Program and Manual modes only)
(Program and Manual modes only)
Red-eye reduction