Справочник Пользователя для Epson photopc 3000z
Making Settings
4-21
4
Using the automatic shut-off feature
When using this feature, your camera saves battery power
by automatically shutting off when idle for a designated
period of time. You can have the camera shut off after ten
seconds, thirty seconds, one minute, three minutes, or five
minutes. This feature is only enabled when using batteries
to power the camera.
by automatically shutting off when idle for a designated
period of time. You can have the camera shut off after ten
seconds, thirty seconds, one minute, three minutes, or five
minutes. This feature is only enabled when using batteries
to power the camera.
Note:
If the camera is connected to a computer with a serial cable,
the power automatically turns off when the camera is idle
for one minute.
If the camera is connected to a computer with a serial cable,
the power automatically turns off when the camera is idle
for one minute.
Changing the setting
To change the automatic shut-off interval, follow these
steps.
steps.
1.
Set the dial switch to
and turn on the camera.
2.
Press the Camera SETUP button. The current setting
appears at the top-right corner of the LCD monitor.
appears at the top-right corner of the LCD monitor.
3.
Press the Power Save button. You can select
10 seconds, 30 seconds, 1 minute, 3 minutes, or
5 minutes as the interval.
10 seconds, 30 seconds, 1 minute, 3 minutes, or
5 minutes as the interval.
4.
Press BACK to save your setting.
Turning the camera back on
When the dial switch is set to a red icon, you can turn the
camera back on by pressing the shutter button or the
POWER button.
camera back on by pressing the shutter button or the
POWER button.
When the dial switch is set to
,
, or
, you can turn
the camera back on by pressing any button on the back of
the camera, or the POWER button.
the camera, or the POWER button.
Setting the LCD monitor’s brightness level
Follow these steps to change the LCD monitor’s brightness
level.
level.
1.
Set the dial switch to
and turn on the camera.
2.
Press the Camera SETUP button.
3.
Press the arrow icon buttons to increase or decrease the
brightness level.
brightness level.
4.
Press the BACK button to return to the previous screen.