Справочник Пользователя для Epson Epson

2.

Remove the four screws securing the drive to the drive bay.
There are two screws on each side of the drive.

3.

Slide the drive out the back of the bay.

4.

If you removed the only IDE device connected to the interface

the device used, you may want to disconnect the device

cable from the interface on the main system board and

remove it from the computer.

5.

If you have finished installing or removing drives, replace

the computer’s cover, as described under “Replacing the

Cover” in Chapter 4. Then see “Using the Fixed Disk Setup
0ption” in Chapter 2 for instructions on defining your new

drive configuration.