Справочник Пользователя для Epson Epson

5.

Replace the bracket as shown below and secure it to the

back panel with the four screws you removed earlier.

6.

If there is a drive installed in the rear internal bracket, follow

steps 6 through 8 under “Installing a Drive in the Rear

Internal Bracket” to reconnect the drive and power cables

to the drive.

7.

If you have finished installing or removing drives, replace

the computer’s cover, as described under “Replacing the

Cover” in Chapter 4. Then see “Using the Fixed Disk Setup
0ption” in Chapter 2 for instructions on defining your new

drive configuration.