Справочник Пользователя для Tally Genicom 6600
High Density Barcode
71
Example 1: Barcodes can be expanded by doubling the ratio of the light/dark
bars. Code 39, which is normally 1:1:3:3 can be printed double
wide by sending the Version 2 Graphics Pass,
^M0505000^IBARC,C39,R2:2:6:6,E,12345^G^- prints:
wide by sending the Version 2 Graphics Pass,
^M0505000^IBARC,C39,R2:2:6:6,E,12345^G^- prints:
Example 2: Barcodes can also be expanded by replacing the ratio numbers in
Table 3, page 65, with other values that are not exact multiples.
The Version 2 Graphics Pass,
^M0505000^IBARC,UPCA,R2:3:4:6:6:8:8:9,E,1234567890^G^-
prints:
The Version 2 Graphics Pass,
^M0505000^IBARC,UPCA,R2:3:4:6:6:8:8:9,E,1234567890^G^-
prints:
High Density Barcode
Normally, barcodes print at 60 DPI horizontally. For improved readability, they
may also print at 120 DPI. The 120 DPI, High Density Mode can be toggled
ON and OFF by the command:
may also print at 120 DPI. The 120 DPI, High Density Mode can be toggled
ON and OFF by the command:
Command KF
Example:
The command sequence
^M0505000^KF^IBARC,C39,B,MAU THE CAT^G^KF prints:
^KF first turns the High Density mode for barcodes ON, then the barcode is
printed. The second ^KF turns High Density Mode OFF.
printed. The second ^KF turns High Density Mode OFF.
NOTE: Darkbar Control Panel settings overrides ^KF if Darkbar is ON.