Справочник Пользователя для Siemens 2010 tango

kap03.fm5

18.7.99

Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619

Not every malfunction means that there is an actual de-

fect in your telephone. In some situations you may save 

time and money if you can eliminate the cause of simple 

faults yourself. The information below will help you do 

this.

No display appears

Handset is not switched on.

Switch on the handset.

Battery is empty.

Replace the battery with a backup 

battery or recharge it.

Cannot seize the dial-up line; 

no dial tone

The plug on the power cord 

is not connected properly.

Check the plug on the base station 

and telephone socket; if necessary 

remove it and plug it back in 

(➔ page 2).

The plug on the power cord 

is not connected properly.

Check the plug on the base station 

and the socket; if necessary

remove it and plug it back in

(➔ page 2).

The dial-up line is being used 

by another handset.

Wait until the dial-up line is free.

Cannot set up a radio link to 

the base station – symbol on 

the handset flashes.

Handset is not registered.

Register the handset at the base 

station (➔ page 48).

The plug on the AC power 

adapter cord is not connec-

ted properly.

Check the plug on the base station 

and the socket; if necessary re-

move it and plug it back in.

Base station or handset does 

not ring.

Ringer volume is set to low.

Adjust the base station

(➔ page 32) or handset

(➔ page 34) ringer volume.

The ring assignment is not 

set correctly.

Adjust the ring assignment

(➔ page 49).

No connection after dialling a 

call number; dial tone can 

still be heard.

Wrong signalling method.

Reset the signalling method 

(➔ page 15).

With telephone systems:

no connection or wrong con-

nection after dialling from a 

memory.

Exchange code not entered

Enter exchange code (➔ page 18).