Справочник Пользователя для Auto Page autopage rs-850lcd

                                                                                  

JAN/07/2003 

 

RS850 OP   

10

system must first be disarmed either by using your remote transmitter, or by 
operating the Manual override sequence.

   

1.  From the disarmed condition, 

turn the ignition to “ON” position. 

2.  Push and hold valet switch for 2 

seconds until the LED turns on. 
The LED wills remain on as long 
as the system is in 'valet mode'. 

 

1.Return to normal operation, turn ignition 'on'. 

2. 

Push and hold valet switch for 2 seconds, The LED wills turns off 

indicate the system are exiting the valet mode.

 

L. CAR LOCATOR   

Under armed mode, press the 

  button to active 

car locator function. The siren will chirp 6 times. 
The parking light will flash 12 times, for you to 
easily locate your car. 

(See Alarm Feature I – 7 Programming.)   

The transmitter can be used as a remote panic switch to manually trigger the 
alarm in case emergency.

   

1.  Press and hold the 

  button for 3 second. The alarm 

will immediately sound.   

2.  During panic mode, the normal function of this 

transmitter button will be suspended. The transmitter 

  and 

 buttons can be used to lock and unlock 

the door (if the option is installed), however once the 

  button is pressed, the vehicle’s starter disable 

device, (where installed) will be enable allowing the 
vehicle to start. 

 

3.  To stop the alarm, press and hold the transmitter 

  or 

  button on the 

transmitter again for 3 seconds. Also if any transmitter button other than 

  or 

  button is pressed and released, the panic mode will be turned 

off immediately. 

4. 

If the button is not pressed, the alarm will automatically stop after 60 
seconds.