Справочник Пользователя для Adam Equipment 3106610631
15 |
P a g e
© Adam Equipment Company 2010
6.6
ACCUMULATED
TOTAL
•
The scale can be set to accumulate manually by pressing the
[Print/M+/Esc] key or automatically when a weight is removed from
the scale. See the Section 7.3 for details of setting the Parameter “C3
PRM” and “C4 Aon”. The accumulation function is available when
weighing or when counting parts. However the memory is cleared if
the weighing units or functions are changed.
[Print/M+/Esc] key or automatically when a weight is removed from
the scale. See the Section 7.3 for details of setting the Parameter “C3
PRM” and “C4 Aon”. The accumulation function is available when
weighing or when counting parts. However the memory is cleared if
the weighing units or functions are changed.
•
When the weight (or count) displayed is stored in memory the display
will show “ACC 1” and then the total in memory for 2 seconds before
returning to weighing. The RS-232 interface will output to a printer or
PC.
will show “ACC 1” and then the total in memory for 2 seconds before
returning to weighing. The RS-232 interface will output to a printer or
PC.
•
Remove the weight, allowing the scale to return to zero and put a
second weight on. When this value is stored, the display will show “ACC
2”, then the new total and finally the value of the second weight.
Repeat as necessary to add all the values needed to the memory.
second weight on. When this value is stored, the display will show “ACC
2”, then the new total and finally the value of the second weight.
Repeat as necessary to add all the values needed to the memory.
•
To view the total in memory press the [Print/M+/Esc] key when there is
no weight on the scale. The display will show the number of entries
and the total.
no weight on the scale. The display will show the number of entries
and the total.
•
To clear the memory (set the value to zero) press the [Func/C] key
during the time the totals are being displayed.
during the time the totals are being displayed.