Справочник Пользователя для Sharp FO-DC535

Using an LDAP Server: Searching for Destinations and User Authorization

3. Netw

or

k 

Scanner

•

If your e-mail address is also required for login, the machine will 
automatically use the sender e-mail address stored in your book (you will 
not be prompted to enter your e-mail address).

•

This completes the login procedure. For Scan to E-mail, the sender name 
and sender e-mail address stored in your personal book are used.

•

If “SERVER ACCESS DENIED. PLEASE CHECK AND RE-ENTER THE 
INFORMATION.” appears in the display, your login name, e-mail address (if 
required), or password does not match the corresponding entry in the 

LDAP server. Press 

 to clear the message. Check your personal book 

to make sure that your login name (and sender e-mail address if required) 
are entered correctly (see the following section). Repeat the login 
procedure, taking care to enter the correct password.

•

 If an incorrect login name or password is entered three times in a row, 
“USER LOCK OUT” will appear and it will not be possible to operate the 
machine for 1 minute.

•

If the machine was unable to establish communication with the LDAP 
server, an error message will appear. Follow the instructions in the 
message (you may need to check the LDAP settings in the machine’s Web 
page or consult your network administrator). To clear the message, press 

.

ENTER PASSWORD
  [

                                                 ]