Справочник Пользователя для Sundance Spas camden 780
8.0 Control Functions
8.1 Control Panel
A. LED Display: can display current
A. LED Display: can display current
water temperature (default display),
water temperature setpoint,
selected skimming/heating mode,
and error messages.
water temperature setpoint,
selected skimming/heating mode,
and error messages.
B. Heat Indicator: lit when heater is
on.
C. Warmer ( + ) Button: increases
water temperature setpoint.
D. Cooler ( - ) Button: decreases water temperature setpoint.
E. Jets 1 Button: turns jets pump #1 on and off. Press once for low
speed; press a second time for high speed; press a third time to turn
pump #1 off.
pump #1 off.
F. Light Button: turns underwater light on and off.
G. Jets 2 Button: turns high-speed jets pump #2 on and off. Press once to
turn on; press a second time to turn pump #2 off (2-pump models only).
Operation Details
• Temperature Adjustment: 65 to 104 °F (18 to 40 °C). Factory
• Temperature Adjustment: 65 to 104 °F (18 to 40 °C). Factory
default setting is 100 °F (38 °C).
• Underwater Light Operation: light runs for 1 hour then shuts
off for increased bulb life.
• Jets 1/Jets 2 Button Operation: jets run for 20 minutes after
activated, then turn off automatically to conserve energy. Simply
press either jets button to continue operation for an additional 20
minutes.
press either jets button to continue operation for an additional 20
minutes.
Page 14
B
C
D
E
F
G
A