Справочник Пользователя для TEAC LP-R550USB

Скачать
Страница из 100
6
Please  use  CD,  CD-R  and  CD-RW  discs  bearing  the 
“DIGITALAUDIO” mark.
CD
CD-R
CD-RW
<  Depending on the quality of the disc and/or the condition of the 
recording, some CD-R or CD-RW discs may not be playable.
<  Copy-protected  discs  and  other  discs  which  do  not  conform 
to  the  CD  standard  may  not  play  back  correctly  with  this  unit. 
If  you  use  such  discs  with  this  unit,  TEAC  Corporation  and 
its  subsidiaries  cannot  be  responsible  for  any  consequences 
or  guarantee  the  quality  of  reproduction.  If  you  experience 
any  problems  with  such  non-standard  discs,  contact  the  disc 
manufacturers.
Handling precautions
<  Always  place  the  disc  on  the  disc  tray  with  the  label  side  up. 
Compact discs can be played or recorded only on one side.
<  To remove a disc from its storage case, press down on the center 
of the case and lift the disc out, holding it carefully by the edges.
  How to remove the disc 
How to hold the disc
Discs
How to Replace the Stylus
The stylus should last about 50 hours under normal use.
However, it is recommended that the stylus be replaced as soon as 
you notice a change in sound quality.
Prolonged use of a worn-out stylus may damage the record.
Wear and tear on the stylus will be accelerated under frequent use 
of 78 RPM records because of its higher speed.
CAUTION:
<  Do not disassemble or bend the stylus.
<  Handle  with  care,  as  the  stylus  is  delicate.  Use  of  a  bent  or 
broken stylus may damage the record and cause the turntable to 
malfunction.
<  To avoid injury, do not touch the tip of the stylus.
<  Keep the stylus out of the reach of children.
<  Do not expose the stylus to extreme heat.
<  Contact a qualified repair company if you experience difficulty in 
replacing the stylus.
Removing old stylus
1. Turn off the unit’s power before you replace the stylus.
2. Set a screwdriver at the tip of the stylus and push it down in the 
direction “A”.
3.  Remove the stylus by pulling it forward.
A
Installing a new stylus
1. Hold the tip of the stylus and insert the other edge by pressing in 
the direction “B”.
2.  Push up in the direction “C” until it locks at the tip.
B
C
Replacement stylus (sold separately):
STL-103 (includes 3)
SPL-102 (includes 2, for SP records only)
For stylus replacements, contact your dealer or TEAC listed on the 
back of this Owner’s manual.