Справочник Пользователя для TEAC CD-RW901

When nearing the end of a track or disc, the

indica-

tor will light up on the display.
The number of seconds (1 to 99) before the track/disc 

end that the indicator is displayed can be set beforehand.
To set the message display time, use the EOM TRK

or EOM DISC options on the PLAY sub-menu (see

“Operation basics” on page 16).

NOTE

Call function allows the unit’s playback position to 
be returned to the point at which playback last started 
from ready mode. If there is no “call point”, an error 
message 

NoCall PT!!

 will be displayed.

NOTE

This function allows the playing back a single track, and

the automatic cuing of the next track ready for playback.
Combained with Auto Cue function, the unit will enter

playback ready mode at the start of the next track.

Press

AUTO READY

key on the front panel or remote

control to set the function on. The 

indicator will

light up.

When the auto cue function is on, when a track is select-

ed, the point where sound begins (not where the track

begins) on that track is located, and the unit enters play-

back ready mode. Then, when the 

PLAY

key is pressed,

playback begins at exactly that point.

Press

AUTO CUE

key on the front panel or remote con-

trol to set the function on. The 

indicator will light

up.
Use the A_CUE LEVEL option to set the sound start 

position detection level.

When in playback or playback ready mode, if the

ERASE

key is pressed, the display shows “RID”

code on the screen. If there is no “RID” code on the 

disc or the code has not been recorded on the disc,

Incomplete!

 will appears on the display.

When in playback or playback ready mode, if the

FAINALIZE

key is pressed, the display shows “ISRC”

code on the screen. If there is no “ISRC” code on the 

disc or the code has not been recorded on the disc,

Incomplete!

 will appears on the display.

In this function, when the unit is in playback mode, and

when the

PLAY 

key is pressed, the unit starts playback

from the beginning of the next track.
Use the Menu option or the

INC PLAY

key on the

remote control to set this mode on. The 

indicator

will blink during playback or playback ready mode.

When the

STOP

key is pressed, the unit will enter play-

back ready mode at the start of the next track.