Справочник Пользователя для Sharp pn-g655u

E

22



You can set the time to switch the monitor on and off.

Set this function with “SCHEDULE” in the OPTION menu. (See 

page 19.)

SCHEDULE

No.

POWER

DAY OF THE WEEK

TIME

INPUT

XXXX/XX/XX XXX  XX:XX:XX 

(2)

OK…[MENU]

1 0 2 4 x 7 6 8

V: 60 Hz    H: 48.4 kHz

(1)

(3)

(4)

(5)

2.  Set the SCHEDULE. (See the description below.)

Press 

 or 

 to select the date and time, and press 

 or 

 to change the setting.

MENU

SCHEDULE becomes effective.

(1)
●: SCHEDULE effective

-: SCHEDULE not effective
(2) POWER
ON  :  Switches the monitor on at the specified time.

OFF :  Switches the monitor off at the specified time and puts 

the monitor in standby mode.

(3) DAY OF THE WEEK
Specifies the day of the week to execute the SCHEDULE.

ONLY ONCE:

Executes the SCHEDULE once on the specified day.

Specify the day of the week to execute the SCHEDULE.

EVERY WEEK:

Executes the SCHEDULE on the specified day of the week 

every week. Specify the day of the week to execute the 

SCHEDULE. 

Periodic setting such as “Monday through Friday” is also 

possible.

EVERY DAY:

Executes the SCHEDULE every day regardless of the day 

of the week.

(4) TIME
Specifies the time to execute the SCHEDULE.

Set the time on a 24-hour basis.
(5) INPUT
Specifies the input mode at power-on. When not specifying, 

the screen at the previous power-off appears.

Input modes displayed on “PC1/AV1” depend on DVI 

SELECT settings.

Input modes displayed on “PC3/AV2” depend on BNC 

SELECT settings.

Caution

•  Do not switch off the main power after setting the 

SCHEDULE.

•  Specify the correct date and time. (See pages 14 and 19.) 

SCHEDULE does not function unless the date and time are 

specified.

•  Check regularly that the set date and time are correct.

TIPS

•  Up to 8 SCHEDULE items can be registered.

•  Setting the SCHEDULE flashes the power LED alternately 

in red and orange in standby mode.

•  A SCHEDULE that has a large number has precedence 

over that of a small number when schedules overlap.



FLESH TONE
Adjust the hue control.
3D-NR
Reduce the noise of playback images on video.

Setting a higher level reduces more noise. However, it may 

cause blurring on an image.
MPEG-NR
Reduce block noise caused by digital compression.
3D-Y/C (AV3)
Specify whether to perform 3-dimension Y/C separation.

If dot interference or cross-color is occurring in fast-motion 

scenes, selecting “OFF” may improve the image quality.