Справочник Пользователя для Alliance Laundry Systems sc50

37

F232062

Figure 28

Note: There are two different mounting bolt 
layouts which may be used for the 80-pound 
capacity machine. See Figure 28. The bolt 
holes marked A are to be used for close 
mounting—machines installed with a 1-inch 
(25.4 mm) clearance between machines. 
The bolt holes marked B are to be used for 
standard mounting—machines installed with 
a minimum clearance of 8 inches (203 mm) 
between machines.

2. Adjust the drill depth gauge to match the 

length of the J-bolt, minus 1-1/2 inches 
(38 mm). See Figure 29.

Figure 29

MI003FE1A

H026I