Справочник Пользователя для Alliance Laundry Systems sc50

64

F232062

5. Clean inlet hose filter screens: 

a. Turn water off and allow valve to cool, 

if necessary. 

b. Unscrew inlet hose and remove 

filter screen. 

c. Clean with soapy water and reinstall. 

Replace if worn or damaged.

6. Tighten motor mounting bolt locknuts and 

bearing bolt locknuts, if necessary.

7. Use compressed air to clean lint

from motor.

8. Clean interior of machine, both basket and 

shell, by wiping with a water-soaked 
sponge or cloth.

9. Use compressed air to ensure that all 

electrical components are free of moisture 
and dust.

10. For variable-speed models only, clean 

AC drive cooling fan blades monthly 
(more often if required by the condition of 
the air).

a. Open the top cover and remove the 

control module cover.

b. Gently wipe the fan blades clean with a 

dry cloth.

Note: Disconnect power to the machine 
before performing the quarterly maintenance 
procedures.

1. Tighten door hinges and fasteners, 

if necessary.

2. Tighten anchor bolts, if necessary.

3. Verify that the drain motor shield is in 

place and secure.

4. Check all painted surfaces for bare metal. 

(Matching gray paint is available from the 
manufacturer.)

• If bare metal is showing, paint with 

primer or solvent-based paint. 

• If rust appears, remove it with 

sandpaper or by chemical means. 
Then paint with primer or solvent-
based paint. 

5. Clean steam filter, where applicable. See 

Figure 52.

a. Turn off steam supply and allow time 

for the valve to cool.

b. Unscrew cap. 

c. Remove element and clean. 

d. Replace element and cap.

Figure 52

H042IE1A

Cap

Filter

Element