Справочник Пользователя для Epson 1160

Here are some basic troubleshooting tips if you have any problems setting up your 
printer, installing software, getting good print quality, feeding paper, or other 
miscellaneous problems.

■

The first time you install ink 
cartridges, the printer must charge 
its ink delivery system for about 
two minutes. Wait until charging 
finishes (the 

 

Ppower light stops 

flashing) before you turn off the 
printer. If you turn off the printer 
while it’s charging, it may not 
charge properly and use more ink 
than necessary the next time you 
turn it on. 

■

Make sure the ink cartridge 
clamps are locked down 
completely and that no packing 
material remains in the printer. 
Turn off the printer, disconnect it 
from your computer, and turn it 
on again to clear the error. Then 
turn it off, reconnect it, and turn 
it on again.

■

If the printer stops moving or 
making noise, but the 

 

Ppower 

light is still flashing after 
5 minutes, turn off the printer. 
If the light is still flashing when 
you turn it back on, contact your 
EPSON dealer or see “Where To 
Get Help” on page 61.

■

Carefully follow the instructions 
on the Start Here poster.

■

Make sure your printer cable is 
securely connected to the printer 
and computer.

■

Make sure you’ve closed all other 
applications, including any screen 
savers and virus protection 
software. Then try installing the 
printer software again.

See your electronic Reference Guide 
for instructions on configuring your 
printer for use on a network.