Справочник Пользователя для Epson emp monitor operation v4.30

You can select projectors and right-click on them to select Web control 
even when the following are being displayed.

Group properties s

Warning and Error Projector list (Control operations can only be carried 
out for projectors with a warning status.) s

This is useful for carrying out certain control operations such as turning 
a projector's power on and off at specified times every day or every week.

Timer settings can be carried out either for a single projector only, or all 
at once for all projectors in a group.

The following window will be displayed and you can then check the timer 
setting status.

The line colors in the Timers list have the following meanings:

The details that can be checked and operations that can be carried out at 
this time are given below.

Current day's timer setting

When some of the projectors in the group have timer setting 
enabled and others have it disabled for the current day's timer 
setting

When the current day's timer setting is a disabled setting

Timer setting for a day other than the current day

Selects a group or projector to check the status of.

When a group is selected, the timer setting statuses for all 
projectors in that group are displayed.

Shows the current day in a red box.

Days for which timer settings have been made are shown 
in bold.

Click

 or 

to switch to the calendar for the previous 

or next month.

Shows a list of the timer settings.

Switches the timer settings that have been selected from 
the timer list between enabled and disabled.

Registers new timer settings. s "Procedures for new 
timer settings"

Lets you change the timer settings that have been 
selected from the timer list. If a group has been selected 
for status checking, the settings cannot be changed.

Lets you delete timer settings that have been selected 
from the timer list.