Справочник Пользователя для Sub-Zero wallovens

T H E O V E N

M O U N T   O V E N  T O   C A B I N E T

Once the oven is fully inserted into the cabinet
opening, locate the mounting holes on the
oven side trim. There will be four for a single
oven and six for a double oven. Refer to the
illustration below. Use a 

1

/

16

" drill bit to drill

pilot holes into the cabinet. Use the provided
wood screws to secure the oven to the cabinet
through the oven mounting holes.

W O L F  

Unpack the box containing the oven compo-
nents found in each oven cavity. Install the
oven rack guides onto the shoulder screws
located on the interior side walls of the oven.
Slide the oven racks onto the support racks
within the oven. There are three racks per
oven. Place the broiler pan and grid on a rack
within the oven, if desired.

Turn on the power supply to the oven. The
oven control panel should be closed (no visible
control pads). Rotate the control panel to the
open position (controls visible) by pressing the
button below the center of the panel.

Set the time of day by pressing the CLOCK
touch pad, input the desired time by using the
number pads, then touch ENTER.

Select any of the eight cooking modes on the
control panel. Verify that the oven is coming
up to temperature. For the double oven, be
sure to verify operation of both ovens.

IMPORTANT NOTE: A small amount of smoke
and odor may be noticed during the initial
break-in period. Refer to the Use & Care Infor-
mation for additional information.

3

3

O V E N   O P E R A T I O N

IMPORTANT NOTE: Prior to operating the
oven, be sure to read the entire Wolf Built-In
Ovens Use & Care Information included with
the oven for important safety, service and
warranty information.