Справочник Пользователя для PAC swi-rc

06-18-10

Refer to

 The Vehicle Application Guide or www.pac-audio.com/swixprogramming/swixprogramming.asp for the proper version 

number. Refer to the programming chart on page 4 for the proper radio select switch setting. Fill in the information below for 

quick reference. Please note that it is very important to set the radio select switch before turning on the ignition

beginning programming.

 ____________       

 ____________

Press and hold programming/

mode button on SWI-RC. Turn the 

vehicle ignition to the ON position 

while still holding the button in.

The LED on the

SWI-RC will light.

Release the programming/

mode button.

The LED will turn off, 

indicating memory is 

cleared.

Press and release the program-

ming/mode button the same 

number of times as the desired 

version number.

The LED will flash 

each time the button is 

pressed and released.

WAIT 3 seconds, the 

LED will flash the same 

amount of times as set 

version number.

Turn vehicle ignition 

to OFF position. 

Vehicle programming 

sequence is complete.

OFF

ACC

IGN

STRT

OFF

ACC

IGN

STRT

1 2

 3 4 5

 6 7

 8 

9 

0