Справочник Пользователя для Precor electronic console with the pulse feature 903
page 12
Installing the Mounting Pads
Two adhesive-backed foam pads (one thick and one thin pad)
accompany your electronics option package. The thick pad is
used as a spacer and you place the reed switch on it. The thin
pad is positioned onto the flywheel and becomes the base for
the magnet.
accompany your electronics option package. The thick pad is
used as a spacer and you place the reed switch on it. The thin
pad is positioned onto the flywheel and becomes the base for
the magnet.
CAUTION: Both pads require a 24-hour period to bond
properly to the equipment. Do not operate the treadmill
during this time.
properly to the equipment. Do not operate the treadmill
during this time.
Diagram 9
Place mounting
pad here
To install the mounting pads to the flywheel and side rail on your
903 or 904 treadmill, take the following steps:
903 or 904 treadmill, take the following steps:
1.
Locate the area on the side rail between the right roller
guard and the deck of the treadmill. See Diagram 9.
guard and the deck of the treadmill. See Diagram 9.
Note: Right and left are determined by standing behind the
rear roller and facing the handrail(s).
rear roller and facing the handrail(s).