Справочник Пользователя для Polycom mitel networks 3300
SpectraLink Corporation
Configuration and Administration—NetLink e340/i640 Wireless Telephone
Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation
PN: 72-1084-02-G.doc
Page 33
6. Mitel Networks VoIP Integration Factors
This section describes the mapping between the emulated Mitel Networks 5220 IP
Phone and the NetLink e340/h340/i640 Wireless Telephone.
Phone and the NetLink e340/h340/i640 Wireless Telephone.
Voice messaging access
Voicemail access is obtained through the Message key which is assigned on the
Voicemail access is obtained through the Message key which is assigned on the
handset to
FCN
+
3
.
CODECs
The NetLink e340/h340/i640 Wireless Telephone is compatible with the G.711 and
G.729a/ab CODECs. There is no setting required on the handset.
The NetLink e340/h340/i640 Wireless Telephone is compatible with the G.711 and
G.729a/ab CODECs. There is no setting required on the handset.
DHCP
Dynamic Host Configuration Protocol (DHCP) is a standardized protocol that
enables clients to be dynamically assigned with various configuration parameters,
such as an IP address, subnet mask, default gateway, and other critical network
configuration information. DHCP servers centrally manage such configuration data,
and are configured by network administrators with settings that are appropriate for a
given network environment. The handset will search for Mitel Networks server
configuration in the vendor specific and site-specific options listed in the table
below. The handset will use the following DHCP options if DHCP use is enabled:
Dynamic Host Configuration Protocol (DHCP) is a standardized protocol that
enables clients to be dynamically assigned with various configuration parameters,
such as an IP address, subnet mask, default gateway, and other critical network
configuration information. DHCP servers centrally manage such configuration data,
and are configured by network administrators with settings that are appropriate for a
given network environment. The handset will search for Mitel Networks server
configuration in the vendor specific and site-specific options listed in the table
below. The handset will use the following DHCP options if DHCP use is enabled:
Option Meaning
1 Subnet
Mask
3 Default
Gateway
6 DNS
Server
15 Domain
Name
66 TFTP
Server
151
NetLink SVP Server
152 SpectraLink
OAI
Gateway
128
Mitel TFTP Server address (not currently used by
handset)
129
Mitel PBX RTC IP address
130
String containing “MITEL IP PHONE”
siaddr
Boot server or next server
TFTP
The handset uses TFTP to update the handset software over the 802.11b wireless
LAN.
The handset uses TFTP to update the handset software over the 802.11b wireless
LAN.
DNS
Domain Name System (DNS), an industry-standard protocol, locates computers on
an IP-based network. IP networks rely on number-based addresses to move
information on the network. However, users are better at remembering friendly
names than number-based addresses, so, it is necessary to translate user-friendly
Domain Name System (DNS), an industry-standard protocol, locates computers on
an IP-based network. IP networks rely on number-based addresses to move
information on the network. However, users are better at remembering friendly
names than number-based addresses, so, it is necessary to translate user-friendly