Справочник Пользователя для Pirelli discus dp-l10
76
Chapter
8
8.2.2 WLAN Access Setup
You can set up the access to WLAN via any broadband access device (DSL,
Cable, or company LAN) as long as the network is reliable.
Cable, or company LAN) as long as the network is reliable.
-
SSID: (Service Set Identifier) the name of the network, it is expressed by
the alphanumeric characters.
the alphanumeric characters.
a) Set SSID by site survey
1. Press
1. Press
Menu
>
WLAN
>
WLAN settings
>
Edit act. settings
>
SSID &
security
>
SSID
>
Site survey
The display shows a list of all APs which are found nearby with good signal
strength.
strength.
2. Select the AP’s SSID
b) Set SSID manually
1. Press
b) Set SSID manually
1. Press
Menu
>
WLAN
>
WLAN settings
>
Edit act. settings
>
SSID &
security
>
SSID
>
Manual
2. Input SSID in the SSID edit window
-
Security Setting: for WLAN security and encryption setting
a) Set security
1. Press
1. Press
Menu
>
WLAN
>
WLAN settings
>
Edit act. settings
>
SSID &
security
>
SSID
>
Security
The display shows the security items to be set.
Open:= It sets no encryption.
WEP:= WEP encryption, for WEP key settings. The key must be entered in
hexadecimal or ASCII format: A-F and 0-9. On the right top corner, a counter
decrements and reaches zero as all characters have been entered.
hexadecimal or ASCII format: A-F and 0-9. On the right top corner, a counter
decrements and reaches zero as all characters have been entered.
Information:
Activate the WLAN network only when it has searched AP/Routers in the
wireless area. This would save your consumption of battery power.
wireless area. This would save your consumption of battery power.