Справочник Пользователя для Philips dvp3005k-74
3139 246 15761
28
DVD Setup Menu Options
TIPS:
To return to the previous menu, press
1.
To remove the menu, press
SYSTEM MENU
.
Audio Setup Menu
1
In disc mode, press SYSTEM MENU.
2
Press
1 2 to select ‘Audio Setup’ icon.
3
Press OK to confirm.
Go to Audio Setup Page
Analog Output
Digital Audio Setup
Sound Mode
CD Upsampling
Night Mode
- - Audio Setup Page - -
Analog Output
This options allows you to set the stereo
analog output of your DVD Player.
analog output of your DVD Player.
1
In ‘AUDIO SETUP PAGE’, press
3 4 to
highlight {ANALOG OUTPUT}, then
press
press
2.
Stereo
Select this option when output delivers
sound from only the two front speakers.
Select this option when output delivers
sound from only the two front speakers.
LT/RT
Select this option if your DVD Player is
connected to a Dolby Pro Logic decoder.
Select this option if your DVD Player is
connected to a Dolby Pro Logic decoder.
V SURR
Allows the DVD player to use virtual
surround sound effects.
Allows the DVD player to use virtual
surround sound effects.
2
Press
3 4 to select a setting, then press
OK to confirm your selection.
Digital Audio Setup
The options included in Digital Audio
Setup are: ‘Digital Output’ and ‘LPCM
Output’.
Setup are: ‘Digital Output’ and ‘LPCM
Output’.
1
In ‘AUDIO SETUP PAGE’, press
3 4 to
highlight {DIGITAL AUDIO SETUP}, then
press
press
2.
2
Press the
3 4 keys to highlight an option.
3
Enter its submenu by pressing
2.
4
Press
3 4 to select a setting, then press
OK to confirm your selection.
Digital Output
Set the Digital output according to your
optional audio equipment connection.
Set the Digital output according to your
optional audio equipment connection.
➜
All: If you have connected your
DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.
decoder/receiver.
➜
PCM Only: Only if your receiver is
not capable of decoding multi-channel
audio.
audio.
Helpful Hints:
–
–
If DIGITAL OUTPUT is set to ‘All’, all
audio settings except MUTE are invalid.
LPCM Output
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust ‘LPCM Output’.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust ‘LPCM Output’.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
➜
48kHz: Playback a disc recorded at the
sampling rate of 48kHz.
➜
96kHz: Playback a disc recorded at the
sampling rate of 96kHz that can only be
achieved in Stereo-Classic (Flat) mode.
achieved in Stereo-Classic (Flat) mode.
Helpful Hint:
–
–
LPCM Output can be selected only when
PCM Only is activated.
01-37 DVP3005K_751
15/06/05, 4:43 PM
28