Справочник Пользователя для Olympus ps-bls1

106

EN

You can set the resolution for printing images in advance. The set value is recorded on the 
card with the images.

Automatically set according to the image size.

You can make the desired setting. Press 

i to display the setting screen.

r/p

You can select which card to use when both a CompactFlash and xD-Picture Card are 
loaded.

You can rename image files to make them easier to identify and organize.
The portion of the filename that can be changed depends on the color space. 

g“COLOR 

SPACE” (P. 103)

Z K UTILITY

gP. 125

gP. 125

You can disable the white balance sensor used to determine the light source during auto 
white balance. This is useful when the light source near the sensor and the light source 
illuminating the subject are different.

You can use the AF sensor to fine-adjust the focusing position to a range of ±20 steps (–: closer, 
+: toward )). Normally, there is no need to change this.

Fine-adjust the AF default value and register the setting. You can also register the 
setting according to the lens.
[OFF]

AF focus adjustment is not performed.

Registers and applies all lens AF 
adjustment values not registered 
individually.

Fine-adjusts the AF for each lens. You 
register the adjustment values for up to 20 
lenses.

sRGB : Pmdd0000.jpg

AdobeRGB : _mdd0000.jpg

You can change the character to OFF, A - Z 

or 0 - 9.

Use 

fg to adjust.

s0023_e_00_0_unified.book  Page 106  Monday, February 2, 2009  5:18 PM