Справочник Пользователя для Directed Electronics rk20

Choose. Within 10 seconds, press and release the

Program switch the number of times corresponding

to the feature number you want to program and

then press and hold the switch. .

Transmit. The transmitter is used to select the de-

sired setting. Pressing button one changes the

feature to the LED On setting (or flashes once for

features with more than 2 settings). The horn

honks once. Pressing button 2 changes the set-

ting to the LED OFF setting (or flashes two or more

times for features with more than 2 settings) .

Release, the Program switch.

You can advance from feature to feature by pressing and re-

leasing the Program switch the number of times necessary to

get from the feature you just programmed to the feature you

wish to access. For example, in Menu One, if you just programmed Feature 1-2

and you next want to program Feature 1-3 to off, release the Program switch.

Press and release it once to advance from Feature 1-2 to Feature 1-3. Then press

it once more and hold it. The LED will flash in groups of 3 to confirm that you

have accessed Feature 1-3.

The learn routine is exited when:

The ignition is turned on.

•

The Program switch is pressed too many times.

•

More than 25 seconds elapses between programming steps.

•