Справочник Пользователя для Philips hp5220

(fig. 1)

A

B

C

D

E

F

G

- Clean your skin as you would normally.
- Remove the plug from the wall socket.
- Place the appliance on a stable and flat surface

(e.g. table top).

- Fill the measuring beaker (F) with cold water

up to the level indication.

- Pour the water into the water reservoir (B)

(fig. 2).

- Position the facial mask (A) on to the main unit

(C).

- Insert the plug into the wall socket and switch

the appliance on using on/off switch (D). The
pilot light (E) will now come on (fig. 3).

- After about 4 minutes the appliance will begin

to produce steam.

- Protect your hair style, e.g. by covering it with a

towel.

- You can set the facial mask (A) into the

optimum position (fig. 4) by moving it forwards
or backwards.

- Use the facial sauna as indicated in fig. 5.
- You can use the facial sauna up to a maximum

of 15 minutes in any one treatment.

- Directly after use, switch the appliance off

(fig. 6) and remove the plug from the wall
socket.

- Lift the facial mask (A) from the main unit (C)

(fig. 7).

- Pour the remainder of the water out of the

water tank (fig. 8). Take care, it may still be hot.

- Clean your skin again and apply a nourishing

cream.
Although the appliance is protected against
overheating, we advise you to always switch it
off immediately after use.

- Remove the plug from the wall socket.
- Remove the facial mask from the main unit.

You can rinse the mask under the (hot) tap or
wash in soapy water.

- After each use, clean the main unit with a

damp cloth, if required with some liquid
detergent. Ensure that no water can enter the
appliance.

4