Справочник Пользователя для Philips m5085a
Ph
ilips
Med
ical Sys
tem
s
3
blinks when the defibrillator is in standby mode, is on solid when the
defibrillator is in use, and is off when the defibrillator needs attention.)
C
ON/OFF BUTTON. You can also turn on the Trainer by pressing this
green button. To turn off the Trainer, press the green button again and
hold it down for one (1) second.
D
INFORMATION-BUTTON. This blue “i-button” flashes when it has
information you can access by pressing it. In the Trainer, the i-button
flashes when scenario selection is available and at the beginning of a
patient care pause when CPR coaching is available.
E
CAUTION LIGHT. This triangular light flashes during rhythm analysis and
is on solid when a shock is advised, as a reminder that no one should be
touching the patient.
F
SHOCK BUTTON. This orange button flashes when the Trainer advises
you to deliver a shock; press the Shock button to deliver the simulated
shock.
G
INFRARED (IR) COMMUNICATIONS PORT. This feature is not active
in the Trainer. (In the HS1 Defibrillator, this feature is used to transfer
data directly between the defibrillator and a computer running
HeartStart Event Review data management software.)
H
SPEAKER. When the device is being used, its voice instructions come
from this speaker.
I
TRAINING PADS CARTRIDGE. This reusable cartridge contains
self-adhesive training pads with attached cable. An Adult Training Pads
Cartridge (M5073A) comes with the Trainer. Infant/Child Training Pads
Cartridges (M5074A) are available separately.
J
TRAINING PADS CARTRIDGE LATCH. Slide the latch to the side to
release the pads cartridge for removal.
K
BATTERY COMPARTMENT DOOR. Lift off the door to install or replace
batteries. The Trainer is powered by four disposable AA alkaline cells
inserted in the recess on the back of the unit.