Справочник Пользователя для Pelco C534M
10
Pelco Manual C534M (2/98)
5.0 MAINTENANCE
5.1 REPLACING THE FUSE
The unit is equipped with a 2A fuse on the input. The fuse holder is located on the
rear panel of the unit. To replace the fuse, first remove power to the unit by discon-
necting the power at the wall socket. Rotate the fuse holder counterclockwise until
the fuse holder comes out of its receptacle. Replace the fuse.
rear panel of the unit. To replace the fuse, first remove power to the unit by discon-
necting the power at the wall socket. Rotate the fuse holder counterclockwise until
the fuse holder comes out of its receptacle. Replace the fuse.
WARNING:
Always re-
place a blown fuse with a
fuse of the same rating. Fail-
ure to do so could result in
serious damage to the unit.
fuse of the same rating. Fail-
ure to do so could result in
serious damage to the unit.