Справочник Пользователя для CMS Products 676

6740001

38

November, 2007

The pages that follow contain all the programming procedures for the HotCup.  If you need to do a 
specific task, you can find it immediately by using the Programming Index.  Most of the procedures 
have things in common, and here is a short guide to help you through these conventional 
presentations:

•

All programming procedures assume that you are starting with the standby message showing 

in the display.  If not, just press 

 until you get there.

•

Each programming procedure is highlighted by a pointing hand: 

 so it will stand out.

•

To exit a mode (CONTINUE) at any time, press 

.  Sometimes you may have to press 

the key more than once in order to exit all the way to the standby message.

•

Text that looks like this:

DISPLAY

  represents what you will see in the display on the 

monetary panel.

•

Definitions and helpful information will appear in shadow boxes:

 

The supervisor is allowed to do things that a normal user cannot, like controlling access to certain 
modes.  The supervisor can lock out any of the programming modes to anyone who does not have 
the right "key".  Once a supervisor enters the proper code, he or she will be able to:

•

Change the supervisor access code

•

Lock out any or all of the service keypad modes

•

Select whether price lines are used

•

Set whether data is cleared after being downloaded into a portable data collection device

•

Grant or deny access to data items during 

•

Modify the machine configuration

a. Press 

.  The display shows: 

.  You must enter the four-digit supervisor 

code within 6 seconds to gain access.

b. When you have entered the right code, you will hear two beeps and see 

 in the 

display.

HELPFUL HINT