Справочник Пользователя для Pelco C1572M
C1555M-F (10/05)
7
MODELS
Controller and CPU Components
CM9700-CC1
CPU controller; 120 VAC, 60 Hz or 230 VAC, 50 Hz.
CM9700-SER
Serial communication card (RS-422 SERCOM); provides 8 communications ports to interface peripheral equipment
(4 maximum per CPU).
(4 maximum per CPU).
CM9700-SER-32
Port expansion unit; 32 serial communication (SERCOM) ports per unit. Up to three units can be added to a CC1.
(Check with Pelco Systems Applications Department before adding to an existing CM9700-CC1). Includes
interconnecting cables and adapters for DB9 and RJ-45 connectors. Data interface can be RS-232 or RS-422.
(Check with Pelco Systems Applications Department before adding to an existing CM9700-CC1). Includes
interconnecting cables and adapters for DB9 and RJ-45 connectors. Data interface can be RS-232 or RS-422.
NOTES ON USING THE SYSTEM CPU:
•
You can use CM9760-CC1/CM9760-NW1 CPUs with the System 9770 if the CPU has been updated with software version level 9.01.XXX
(note that at this software level the first three digits—9.01 in this case—must be at the same version level in the CPU (CC1 and NW1) and
in the MGR software; the remaining three digits, such as .001 in version level 9.01.001, can vary).
(note that at this software level the first three digits—9.01 in this case—must be at the same version level in the CPU (CC1 and NW1) and
in the MGR software; the remaining three digits, such as .001 in version level 9.01.001, can vary).
•
Note, however, that software version level 9.01 requires a minimum of 16 MB of RAM in the CPU. If necessary, you can upgrade the RAM
in a CM9760-CC1 using the software upgrade kit appropriate for your CPU. Contact Pelco Technical Support at 1-800-289-9100 or
1-559-292-1981 for additional information.
in a CM9760-CC1 using the software upgrade kit appropriate for your CPU. Contact Pelco Technical Support at 1-800-289-9100 or
1-559-292-1981 for additional information.
Matrix Bay
CM9770-MXB
Video matrix bay equipped with one CM9700-MPS power supply; 100-240 VAC, 50/60 Hz, autoranging.
CM9700-MPS
Matrix bay power supply (spare); 120 VAC, 60 Hz or 230 VAC, 50Hz.
CM9770-DFC
Downframe card and cable assembly; connects multiple matrix bays for expansion purposes.
CM9770-DFL
Downframe card and cable assembly with BNC connectors for looping video.
CM9770-VCC
Video camera card capable of accepting up to 32 camera inputs; also requires a rear panel card (CM9770-DFC,
CM9770-DFL, or CM9770-RPC).
CM9770-DFL, or CM9770-RPC).
CM9770-RPC
Rear panel video card; provides 32 BNC connectors used to connect camera inputs to matrix bay.
CM9770-VMC
Video monitor card providing 16 monitor outputs; requires CM9770-RPM.
CM9770-RPM
Rear panel monitor card; provides 16 BNCs to connect monitor outputs to matrix bay; also interfaces video output
signals from video output card.
signals from video output card.
CM9700-VPP
Video patch panel; provides 32 BNC connections for looping video out of system.
CM9700-VPP-RK
Optional rack mount designed to hold up to 16 CM9700-VPP patch panels.
Network Interface Unit
CM9700-NW1
Network interface unit; network CPU and software necessary for joining two or more independent systems together.