Справочник Пользователя для Pelco C1665M-A
C1665M-A (1/06)
3
Installation
Make sure all parts are present for the unit.
1
Terminal Block (with tension clamps)
1 Wall
Clip
MOUNTING
The TW3004P transceiver is three rack units high and can be mounted into a fi ber rack or onto a wall
using a fiber wall mount kit or the supplied wall clip.
using a fiber wall mount kit or the supplied wall clip.
USING A RACK
You can mount a TW3004P into either an RK5000PS-3U or an RK5000-3U. For additional information,
refer to the RK5000PS-3U/RK5000-3U Fiber Rack Mount Chassis Installation manual.
refer to the RK5000PS-3U/RK5000-3U Fiber Rack Mount Chassis Installation manual.
USING WALL MOUNT KITS
The optional WM5001-3U wall mount base kit allows attachment of a single TW3004P to a wall.
Up to two WM5001-3UEXP wall mount expansion kits can be used to allow attachment of two
additional transceivers to the wall. For additional information, refer to the Fiber W all Mount Kits
Installation manual.
Up to two WM5001-3UEXP wall mount expansion kits can be used to allow attachment of two
additional transceivers to the wall. For additional information, refer to the Fiber W all Mount Kits
Installation manual.