Справочник Пользователя для Pelco C579M
INTRODUCTION
CM9760-SAT
i
Required Software:
CC1 Interface:
CM9760-MGR (System MGR) @ ver 7.80.003 or greater (external PC)
CM9760.EXE @ ver 7.80.003 or greater (9760 HD)
CM9760-KBD @ ver 7.80 or greater
CM9760.EXE @ ver 7.80.003 or greater (9760 HD)
CM9760-KBD @ ver 7.80 or greater
(For software upgrade information, contact Technical Support at 1-800-289-9100.)
(Comm Parameters)
Equipment # 31
Baud Rate 9600
Parity ODD
Baud Rate 9600
Parity ODD
The CM9760-SAT is a sequential video switcher
for use as a Satellite Control System of the
CM9760 system. Below are shown the front and
rear views, the mounting geometry and, for ref-
erence, the pinout designations for all connec-
tors on the unit. The four, 12-pin and one, 6-pin
wiring plugs (shown in Figure 2) are supplied
with the unit. Especially note the COM 2 con-
nector designations. Required software version
levels and other Comm parameters are given
in the information box to the left.
for use as a Satellite Control System of the
CM9760 system. Below are shown the front and
rear views, the mounting geometry and, for ref-
erence, the pinout designations for all connec-
tors on the unit. The four, 12-pin and one, 6-pin
wiring plugs (shown in Figure 2) are supplied
with the unit. Especially note the COM 2 con-
nector designations. Required software version
levels and other Comm parameters are given
in the information box to the left.
• Observe the precaution outlined
in the NOTE below.
• Orient unit as required.
• Mount as deemed appropriate
to your installation.
R E A R
NOTE:
Factory default, video input termina-
tion is 75-ohm, non-looping. If you want the
loop-thru option active for any video input, the
top cover of the unit must be removed to make
the change
loop-thru option active for any video input, the
top cover of the unit must be removed to make
the change
(see
Section 1
,
3.2.1, Looping
Video Inputs
).
You may want to do this before
rack-mounting the unit.
FIGURE 1
CM9760-SAT Front View, Including Mounting Geometry
FIGURE 2
CM9760-SAT Rear View
F R O N T