Справочник Пользователя для Pelco CM9760-KBR

 

C540M-C (10/05)

13

 

1. Make sure all DIP switches are OFF.

2. Connect the RJ-45 straight cable from the COM 1 port on the keyboard to the “Keyboard” connector on the power supply.

3. Connect the RJ-45 reversed cable from the “System” connector on the power supply to a SERCOM port on the CC1. 

4. Plug the power supply into a 120 VAC power source.

5. Turn the main power supply switch ON.

 

Connections

 

  You can also hook up an alternate connection (RS-232) from COM 3 on the keyboard to COM 1 or COM 2 on the back of the CM9700-CC1. 

The cable going from COM 1 to the power supply is still required for keyboard power. With an RS-232 connection, the effective operating 
distance between the keyboard and CC1 is about 50 feet.

PIN 1

PIN 8

SERCOM PORT 5

COM 3

COM 1

POWER SUPPLY

RJ-45 STRAIGHT CABLE

RJ-45 REVERSED CABLE

(BOTTOM OF CM9760-KBD)

PORTS

5 -12

SERCOM BOARD
(LOCATED IN CM9700-CC1)