Справочник Пользователя для Pelco CM9760-KBR

C540M-C (10/05)

ERASING ZONES

To erase a zone, create a zone with no label (null zone) for each zone. The zone with no label overwrites the previous zone.

DVR AND VCR CONTROL

When a camera input is called up and

appears on the LCD display, a CM9700MDD-EVS matrix digital decoder is connected to the sys-

tem. A user can view and control video on both the Endura

™

and matrix systems. The DVR Control Menu appears on the LCD display.

Figure 60. DVR Control Menu

Refer to the CM9700MDD-EVS Installation/Operation manual for information on how to use the DVR controls.

When a camera input is called up and

appears on the LCD display, a VCR is connected to the system. The VCR Control Menu appears on

the LCD display.

Figure 61. VCR Control Menu

VCRs have to be modified appropriately. For example, you may have to add hardware that provides alarm signal feedback. The VCRs must also
interface with the CM9760-VCRC or CM9760-VCRC-P for the VCR control functions to appear on the keyboard’s LCD. Finally, the VCR video
outputs are connected as inputs to the matrix system.

Refer to the CM9760-VCRC and CM9760-VCRC-P Installation/Operation manuals for information on how to use the VCR controls.

MOR

D V R

1001

V C R