Справочник Пользователя для Pelco C677M
TO USE THE ANALOG VIDEO OUTPUT
The analog video output on the back of the ViewStation has been disabled. But you may wish to enable it to demonstrate its use, such as
to archive data.
to archive data.
If you enable the output, usage of the central processing unit (CPU) will increase and could degrade the performance of the system. If
performance is not satisfactory, you should disable the output when you are finished using it.
performance is not satisfactory, you should disable the output when you are finished using it.
To enable the output:
1.
Connect the analog video output adapter cable to the bottom DB15 connector on the back of the ViewStation.
2.
Connect the analog device to the cable.
3.
Minimize the ViewStation application.
4.
On the task bar, click the monitor (Matrox) icon.
5.
Click Display Properties.
6.
Click the Settings tab.
7.
Click Advanced.
8.
Click the DualHead tab.
9.
Click the DualHead Clone or DVDMax button.
10. Check the box for Use DualHead Clone or Use DualHead DVDMax. You can check both boxes. Click OK. Click Yes if asked if you want
to save the settings.
If you connect an NTSC monitor, for example, to the output and select Use DualHead Clone, you will see on the NTSC monitor
exactly what appears on the computer monitor.
exactly what appears on the computer monitor.
If you select Use DualHead DVDMax, you will see only full-screen video on the NTSC monitor. To see the video, you must load video
into one of the windows.
into one of the windows.
If you select both options, you will see exactly what is on the computer monitor. To see a full-screen view of video, you must load
video into one of the windows.
video into one of the windows.
RECORDER AND STORAGE UNIT
VIEWSTATION