Справочник Пользователя для Pelco FR85011
C1642M-A (1/05)
27
Data Tx LED
Flashing amber
Data is being
transmitted onto the
fiber by the data port.
transmitted onto the
fiber by the data port.
—
No action required.
Red
Data Selection switch is
set to an invalid setting.
set to an invalid setting.
Data Selection switch is
set to setting 6, 7, 8, or
9.
set to setting 6, 7, 8, or
9.
Set Data Selection
switch to the correct
setting for the desired
data communication
(refer to Table A).
switch to the correct
setting for the desired
data communication
(refer to Table A).
Not lit
Data is not being
transmitted onto the
fiber by the data port.
transmitted onto the
fiber by the data port.
Data is not present on
the channel.
the channel.
No action required.
Data connection is
faulty.
faulty.
Check data connections.
Data communication
cable is defective.
cable is defective.
Replace cable.
Data Rx LED
Flashing amber
Data is being received
from the fiber by the
data port.
from the fiber by the
data port.
—
No action required.
Red
Data Selection switch is
set to an invalid setting.
set to an invalid setting.
Data Selection switch is
set to setting 6, 7, 8, or
9.
set to setting 6, 7, 8, or
9.
Set Data Selection
switch to the correct
setting for the desired
data communication
(refer to Table A).
switch to the correct
setting for the desired
data communication
(refer to Table A).
Not lit
Data is not being
received from the fiber
by the data port.
received from the fiber
by the data port.
Data is not present on
the channel.
the channel.
No action required.
Data connection is
faulty.
faulty.
Check data connections.
Data communication
cable is defective.
cable is defective.
Replace cable.
Table C.
Troubleshooting with Front-Panel Indicators (Continued)
Indicator Color
Meaning
Possible Cause
Corrective Action
C1642M-A FT85011.book Page 27 Wednesday, January 19, 2005 12:46 PM