Справочник Пользователя для Pelco EHXM30CBW23-2
C1301M (6/05)
23
Quick Programming Guide
(See Page 9)
PRESETS
The ExSite EHXM system has 80 programmable preset positions. Each preset can be programmed to
use all programmable camera settings, and motion detection.
use all programmable camera settings, and motion detection.
The presets are numbered 1-32 and 35-82.
Use the following steps to program a preset.
1.
Select the preset number:
a.
Use the joystick to position the cursor beside PRESET NUMBER. Press Iris Open.
The cursor moves to the right.
The cursor moves to the right.
b.
Move the joystick up or down to view selections. Press Iris Open to enter selection.
2.
Edit the preset label:
a.
Use the joystick to position the cursor beside EDIT PRESET LABEL.
b.
Press Iris Open. The following appears on the monitor:
c.
Use the joystick to position the cursor beside a character. Press Iris Open to enter the
selection. To clear a character, position the cursor beside BACKSPACE, and then press
Iris Open.
selection. To clear a character, position the cursor beside BACKSPACE, and then press
Iris Open.
d.
When the label is completed, move the cursor to OK. Press Iris Open to return to the
Preset menu.
Preset menu.
3.
Edit the preset scene:
a.
Use the joystick to position the cursor beside EDIT PRESET SCENE.
b.
Press Iris Open.
c.
Follow the directions displayed on the monitor.
4.
Edit preset camera settings:
a.
Use the joystick to position the cursor beside EDIT CAMERA SETTINGS.
b.
Press Iris Open. The EDIT CAMERA SETTINGS window appears on the monitor. Refer to
the
the
sections of this manual to change preset
camera settings.
NOTES:
• There are two additional options available for the IR Cut Filter that are only available when
programming a preset. The additional settings are YES and NO. If the IR Cut Filter is set to
YES, the preset scene will be in color. If the IR Cut Filter is set to NO, the preset scene will
be in black and white.
YES, the preset scene will be in color. If the IR Cut Filter is set to NO, the preset scene will
be in black and white.
• You can copy camera settings from one preset to another preset. To copy camera settings
do the following:
1.
Use the joystick to position the cursor beside COPY CAMERA SETTINGS.
2.
Press Iris Open. The cursor moves to the right.
3.
Move the joystick up or down to view selections. Press Iris Open to enter selection.
EXIT
LANGUAGE
ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<DISPLAY SETUP>
<UNIT SETTINGS>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
CYCLE CAMERA POWER
REBOOT SYSTEM
PELCO EXSITE EHXM
<CAMERA>
<OTHER>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
<OTHER>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
BACK
EXIT
EXIT
UNIT SETTINGS
PRESET NUMBER
1
***PRESET NOT DEFINED***
<EDIT PREST LABEL>
<EDIT PRESET SCENE>
<EDIT CAMERA SETTINGS>
<MOTION DETECTION>*
<EDIT PRESET SCENE>
<EDIT CAMERA SETTINGS>
<MOTION DETECTION>*
<CLEAR PRESET>
<CLEAR CAMERA SETTINGS>
<CLEAR CAMERA SETTINGS>
BACK
EXIT
EXIT
REFERENCE INFORMATION
ZOOM
ZOOM
--
CUSTOM CAMERA SETTINGS
--
PRESETS
* Available only with the 23X day/night camera.
LABEL FOR PRESET
PRESET NUMBER ------
1234567890 OK
ABCDEFGHIJ CANCEL
KLMNOPQRST
UVWXYZ.,-/ SPACE
abcdefghij BACKSPACE
klmnopqrst
uvwxyz*;:
PRESET NUMBER ------
1234567890 OK
ABCDEFGHIJ CANCEL
KLMNOPQRST
UVWXYZ.,-/ SPACE
abcdefghij BACKSPACE
klmnopqrst
uvwxyz*;: