Справочник Пользователя для Pelco EHXM30CBW23-2
C1301M (6/05)
33
Quick Programming Guide
(See Page 9)
AUX
An auxiliary output is a programmable signal from the system that can trigger another device to
operate. An auxiliary output is programmable to trigger from an alarm or from a controller.
operate. An auxiliary output is programmable to trigger from an alarm or from a controller.
An AUX 1 command from the controller will activate the relay in the system and operate the device
that is connected to the relay. The output of AUX 1 and AUX 2 can be connected to the alarm input
of a system switch to activate automatic monitor switching and recording.
that is connected to the relay. The output of AUX 1 and AUX 2 can be connected to the alarm input
of a system switch to activate automatic monitor switching and recording.
The following are the available AUX MODE settings:
TOGGLE (default)
Changes the state of the auxiliary output every time an AUX command is
received from the controller.
received from the controller.
LATCHING
Must receive an AUX ON/AUX OFF command from the controller to turn
the auxiliary output on/off.
the auxiliary output on/off.
MOMENTARY
An AUX ON command from the controller turns the auxiliary output on
for the programmed DWELL TIME. The auxiliary output will
automatically turn off when the dwell time is finished.
for the programmed DWELL TIME. The auxiliary output will
automatically turn off when the dwell time is finished.
EXIT
LANGUAGE
ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<DISPLAY SETUP>
<UNIT SETTINGS>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
CYCLE CAMERA POWER
REBOOT SYSTEM
PELCO EXSITE EHXM
<CAMERA>
<OTHER>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
<OTHER>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
BACK
EXIT
EXIT
UNIT SETTINGS
AUX 1 MODE
TOGGLE
DWELL TIME (SECS)
1
AUX 2 MODE
TOGGLE
DWELL TIME (SECS)
1
BACK
EXIT
EXIT
AUX