Справочник Пользователя для Pelco E2020

Pelco Manual C405M-B (8/99)

3

Prior to installation and use of this product, the following WARNINGS should be
observed.

1.

Installation and servicing should only be done by qualified service personnel
and conform to all local codes.

2.

Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or
6P enclosure, it is designed for indoor use only and it must not be installed
where exposed to rain and moisture.

3.

Only use replacement parts recommended by Pelco.

4.

The installation method and materials should be capable to supporting four
times the weight of the enclosure, pan/tilt, camera and lens combination.

Unpack and inspect all parts carefully.

The following items are supplied:

1

Indexer assembly

8

10-32 x 1-inch screws (E1003 only)

4

8-32 x 3/4-inch screws (E2020 only)

6

8-32 x 1-inch screws (E2100 only)

8

Nylon spacers (E1003 only)

1

C405M-B Installation/Operation Manual

Be sure to save the shipping carton, boxes and inserts. They are the safest material
in which to make future shipments.

If an item appears to have been damaged in shipment, replace it properly in its box
and contact the factory at 1-800-289-9100 or 1-559-292-1981 for a replacement.
(International customers fax 1-559-348-1120 for authorization and instructions.)

If an item needs to be returned to the factory for repair, consult the WARRANTY
AND RETURN section of this manual for instructions.

Pelco does not supply the basic tools needed for the installation process. The fol-
lowing tools are recommended:

Phillips screwdriver

E2020

cUL, UL