Справочник Пользователя для Pelco MPT9500TD
8
Pelco Manual C535M-B (8/98)
3.3 CONNECTING TO THE RECEIVERS
The rear panel view and pin out for the 6 pin modular cable is shown in Figure 3.
Refer to Figures 4 and 5 for additional system configurations.
Figure 2. RS-485 Duplex Control System (PTZ Control and Alarm Reporting)
Figure 3. MPT9500 Rear View and RS-485 Serial Port Pin Out
CX9504
CX9504
PROGRAMMING MONITOR
1 TXD (–)
2 TXD (+)
3 GND
4 GND
5 RXD (–)
6 RXD (+)
2 TXD (+)
3 GND
4 GND
5 RXD (–)
6 RXD (+)
RXD (–)
RXD (+)
TXD (–)
TXD (+)
RXD (–)
RXD (+)
TXD (–)
TXD (+)
KEEP PARALLEL CONNECTIONS
INTO RECEIVERS VERY SHORT
NO “T” CONNECTIONS
INTO RECEIVERS VERY SHORT
NO “T” CONNECTIONS
UP TO 32 RECEIVER/PTZ
DRIVERS PER TRUNK LINE
LIMITED BY BAUD RATE
AND ACCEPTABLE LOOP
RESPONSE TIME.
(RECOMMENDED 8 PTZ
DRIVERS, 2400 BAUD)
DRIVERS PER TRUNK LINE
LIMITED BY BAUD RATE
AND ACCEPTABLE LOOP
RESPONSE TIME.
(RECOMMENDED 8 PTZ
DRIVERS, 2400 BAUD)
THE LAST RECEIVER/DRIVER
MUST BE TERMINATED WITH
120 OHMS.
MUST BE TERMINATED WITH
120 OHMS.
RXD (–)
RXD (+)
TXD (–)
TXD (+)
RXD (+)
TXD (–)
TXD (+)
RS-485
SERIAL
PORT
SERIAL
PORT
LOOPING OUTPUT
VIDEO INPUT MONITOR OUTPUT
RESET
FUSE
MODULAR
POWER
CONNECTOR
RS-485
SERIAL
PORT
LOOPING
OUTPUT
VIDEO
INPUT
MONITOR
OUTPUT
RESET
PIN 1
RS-485
SERIAL
PORT
PIN 1 TXD –
PIN 2 TXD +
PIN 3 GND
PIN 4 GND
PIN 5 RXD –
PIN 6 RXD +
PIN 2 TXD +
PIN 3 GND
PIN 4 GND
PIN 5 RXD –
PIN 6 RXD +
RS-485 SERIAL
PORT PIN OUTS
PORT PIN OUTS
REAR VIEW