Справочник Пользователя для Pelco PT506-24A
6
Pelco Manual C580M Rev D (9/97)
4.0 OPERATION
The PT506-24DT will not allow control of any of the six pan/tilt stations until one is
selected by pressing the desired station on the latching selection switches. Once a
selection has been made, the switch will illuminate and all control functions will be
available only to that particular station. It is considered that all pan/tilt and lens
control functions are self-explanatory. Refer to Section 4.1, OPERATIONAL TEST–
PT506-24DT, for details of each control function.
selected by pressing the desired station on the latching selection switches. Once a
selection has been made, the switch will illuminate and all control functions will be
available only to that particular station. It is considered that all pan/tilt and lens
control functions are self-explanatory. Refer to Section 4.1, OPERATIONAL TEST–
PT506-24DT, for details of each control function.
The PT506-24A will allow each pan/tilt station to have auto/random scan operation.
Each station can be put into auto/random mode by pushing the paddle switch “up”
for the corresponding station.
Each station can be put into auto/random mode by pushing the paddle switch “up”
for the corresponding station.
4.1 OPERATIONAL TEST — PT506-24DT
After installing the interconnecting cable between the pan/tilt and control, plug the
control into a 120 VAC outlet, turn the control on, and test operation using the
following procedure:
control into a 120 VAC outlet, turn the control on, and test operation using the
following procedure:
1.
Select a station.
2.
Move the joystick to the “UP” position; the front of the tilt table should move
upwards. Move the joystick to the “DOWN” position; the front of the tilt table
should move downwards.
upwards. Move the joystick to the “DOWN” position; the front of the tilt table
should move downwards.
3.
Move the joystick to the “LEFT” position; the unit should pan to the left (clock-
wise). With the joystick at the “RIGHT” position, the unit should pan to the right
(counterclockwise).
wise). With the joystick at the “RIGHT” position, the unit should pan to the right
(counterclockwise).
4.
Test operation of the diagonal positions of the joystick, which combine both
pan and tilt functions simultaneously. For example, moving the joystick diago-
nally to the left between “LEFT” and “UP” should pan the unit to the left and
move the tilt table up.
pan and tilt functions simultaneously. For example, moving the joystick diago-
nally to the left between “LEFT” and “UP” should pan the unit to the left and
move the tilt table up.
5.
Test Zoom operations by moving the paddle switch “UP” for the TELE opera-
tion and “DOWN” for the WIDE operation.
tion and “DOWN” for the WIDE operation.
6.
Test Focus operations by moving the paddle switch “UP” for NEAR FOCUS
and “DOWN” for FAR FOCUS.
and “DOWN” for FAR FOCUS.
7.
Test Iris operations by moving the paddle switch “UP” for IRIS OPEN and
“DOWN” for IRIS CLOSE.
“DOWN” for IRIS CLOSE.
8.
Rotate the lens speed knob and test for fast and slow speeds of all lens func-
tions by observing their operation as the knob is adjusted.
tions by observing their operation as the knob is adjusted.
9.
Select another station and repeat steps 1 through 8.