Справочник Пользователя для Magma PCI to PCI Interface

If the expansion system is not visible in your Windows Device Manager 
or your Apple System Profiler at all, you will need to turn off your 
computer (first) and then the MAGMA expansion chassis (second) and 
test all cords and cables to ensure you have everything connected 
correctly. If everything seems to be connected correctly, and you are 
sure you have applied power correctly (power up expansion chassis first 
and then the computer), then try these additional troubleshooting steps: 

ƒ 

Try moving the Host Card to a different PCI slot. 

ƒ  Double-check the expansion cable to ensure it is connected 

correctly at both ends. Try another cable, if you have one.  

ƒ 

If the expansion system is still not visible after trying all of the 
above steps, go to 

 to see about getting additional 

help. 

If the PCI to PCI Bridge is now visible, but contains a 

 in front of it, it 

has a problem that must be fixed.  

 

To identify this problem, follow the instructions shown in the previous 
section “

.”  

Resolve the identified problem or go to 

 to see about getting 

additional help.