Справочник Пользователя для Casio exilim ex-z80

26

Snapshot Tutorial

In the REC mode, press [2] (

Use [4] and [6] to select the flash setting 
you want and then press [SET].

When the “R Panel” menu item (page 121) is 
“Off” (so the Control Panel is not displayed), 
pressing [2] (

) will cycle through the 

available flash settings.

• Take care so your fingers and the strap do not block the flash.
• The desired effect may not be obtained when the subject is too far away or too 

close.

• Flash charging time depends on operating conditions (battery condition, ambient 

temperature, etc.) With a fully charged battery it takes anywhere from a few 
seconds to 5 seconds.

• Shooting with flash turned off when lighting is dim results in a slow shutter speed, 

which can cause image blur due to camera movement. Under such conditions, 
secure the camera with a tripod, etc.

• With red eye reduction, the flash is fired automatically in accordance with 

exposure. It does not fire in areas where lighting is bright.

• The presence of outdoor sunlight, fluorescent lighting, or some other light source 

can cause abnormal image colors.

Flash fires automatically in accordance with exposure 
(amount of light and brightness) conditions.

Flash does not fire.

Flash always fires. This setting can be used to brighten a 
subject that normally comes out dark due to daylight or 
backlight (daylight synchro flash).

Soft flash always fires, regardless of exposure conditions

Flash fires automatically. This type of flash can be used to 
reduce the chance of redness in the subject’s eyes.

[2] (

)

Flash

>

?

<

_

¥

<

 indicates the flash will fire.

Back lamp
Flashes orange while the flash is charging to indicate 
that image recording is disabled.

• You will not be able to take another flash snapshot 

until the lamp stops flashing orange, which 
indicates that charging is complete.