Справочник Пользователя для Garmin gpsmap 5212

Appendix

Your chartplotter’s touchscreen does not normally require calibration. However, if the buttons do not 

seem to be responding properly, use the following process to calibrate the screen.

1.  While the chartplotter is turned off, press the   

 key.

2.  When the Warning screen appears (with the 

 button), touch anywhere on the black 

portion of the screen for approximately 15 seconds until the Calibration screen is displayed.

3.  Follow the instructions on the screen until “Calibration is complete” is displayed.
4.  Touch 

.

  Note: To capture screenshots, you need the optional Garmin RF Wireless Remote Control.

You can capture a screenshot of any screen displayed on your chartplotter as a bitmap (.BMP) file 

and then transfer it to your computer.

1.  Insert an SD card into the SD card slot on the front of the chartplotter. 
2.  Touch 

 > 

 > 

.

3.  Touch 

 to turn screenshot captures 

On.

4.  When you are on a screen you want to capture, press the 

 button on the Garmin RF 

Wireless Remote Control for at least six seconds.

5.  Touch 

 when the Screenshot Taken window is displayed.

1.  Remove the SD card from the chartplotter and insert it into an SD card reader that is attached to 

a computer.

2.  From Windows Explorer, open the Garmin\scrn folder on the SD card.
3.  Copy the appropriate .BMP file on the card and paste it to any location on the computer.