Справочник Пользователя для Integra dps-6.7

 

49

 

With these settings, you can adjust the multichannel out-
put signals relative to the listening position.
For 5.1-channel surround playback, ideally your speak-
ers should all be the same distance away from the listen-
ing position, but this isn’t always practical. By setting a 
delay time for the center and surround speakers, you can 
adjust their virtual positions without having to physically 
move them, creating the ideal listening environment. The 
diagram below shows the ideal locations for the center 
and surround speakers.

 

■

 

Center Delay (A) = Df – Dc

 

When Df equals Dc.

 

When (A) is approx. 1 ft. (0.3 m)

 

When (A) is approx. 2 ft. (0.6 m)

 

When (A) is approx. 3 ft. (0.9 m)

 

When (A) is approx. 4 ft. (1.2 m)

 

When (A) is approx. 5 ft. (1.5 m)

 

■

 

Surr. Delay (B) = Df – Ds

 

When Df equals Ds.

 

When (B) is approx. 5 ft. (1.5 m)

 

When (B) is approx. 10 ft. (3 m)

 

When (B) is approx. 15 ft. (4.5 m)

 

When (B) is approx. 20 ft. (6 m)

 

When (B) is approx. 25 ft. (7.5 m)

 

• The delay settings have no effect on 192 kHz/

176.4 kHz DVD-Audio. 

• To use the delay settings with SACD playback, in the 

SACD Audio Setup, select PCM.

 

With the Dynamic Range Control function you can 
reduce the dynamic range of Dolby Digital material so 
that you can still hear quiet parts even when listening at 
low volume levels—ideal for watching movies late at 
night when you don’t want to disturb anyone.

 

The full dynamic range is preserved.

 

The dynamic range of Dolby Digital material is 

compressed.

 

• The impact of the Dynamic Range Control function 

depends on the Dolby Digital material that you are 
playing and with some material there will be little or 
no effect.

• When the DVD player is set to Standby, this function 

is automatically set to Off.

• Depending on the Speaker Configuration settings, this 

setting may be fixed.

 

This setting determines how the DVD player’s built-in 
Dolby Pro Logic decoder works with 2-channel material.

 

The Dolby Pro Logic decoder decodes Dolby 

Surround material and processes the following audio 
formats: 2-channel Dolby Digital on DVD-Video 
discs, 48 kHz (16-, 20-, and 24-bit) PCM audio on 
DVD-Video discs, and 2-channel audio on CDs.

 

The Dolby Pro Logic decoder is off.

 

• If the Center Speaker or Surround Speaker is set to Off 

in the Speaker Configuration settings (page 48), the 
Dolby Pro Logic decoder will not work even if you 
select Auto or On.

 

With this setting you can choose whether DSD (Direct 
Stream Digital) or PCM is output when playing Super 
Audio CDs.
When DSD is selected, the Speaker Configuration set-
tings have no effect and the source is output as it is: 2-
channel material is output as 2-channels, and multichan-
nel material is output as multichannel.
When PCM is selected, the source is output is in accor-
dance with the Speaker Configuration settings and the 
output is down mixed.

 

The source signal is output as it is.

 

The source signal is output in accordance with 

the Speaker Configuration settings.

FL

SW

FR

SL

SR

(A)

(B)

Ds

Df

Dc

Ideal location of center speaker

All speakers should be 
located within the circle 
with a radius of Df.

Ideal location of a 
surround speaker

DPS-6.7_En.book Page 49 Monday, July 31, 2006 3:12 PM