Справочник Пользователя для Mercedes Benz 2004 c 320 4matic

왘

On wheel to be changed, remove wheel 
cover by reaching into two openings of 
the wheel cover and pulling away from 
the wheel.

왘

On wheel to be changed, loosen but do 
not yet remove the wheel bolts 
(approximately one full turn with 
wrench). 

G

The jack is designed exclusively for jacking 
up the vehicle at the jack take-up brackets 
built into both sides of the vehicle. To help 
avoid personal injury, use the jack only to lift 
the vehicle during a wheel change. Never 
get beneath the vehicle while it is supported 
by the jack. Keep hands and feet away from 
the area under the lifted vehicle. Always 
firmly set parking brake and block wheels 
before raising vehicle with jack.

Do not disengage parking brake while the 
vehicle is raised. Be certain that the jack is 
always vertical (plumb line) when in use, 
especially on hills. Always try to use the jack 
on level surface. Make sure the jack arm is 
fully seated in the jack take-up bracket. Al-
ways lower the vehicle onto sufficient ca-
pacity jackstands before working under the 
vehicle.